Zigbee in Chile
SUBTEL compliance for Zigbee smart home devices under Resolution 737 in Chile
10 devices in catalog
There are 10 Zigbee devices with Resolution 737 SUBTEL compliance information in our public catalog. Devices span 9 distinct technical categories; the most represented are Wireless Laser Optical System (Alineador láser de ejes) (2 devices, 20%), Sensor Zigbee de fuga de agua (1 devices, 10%), Sensor Zigbee de movimiento PIR (1 devices, 10%). The 3 brands with the strongest presence are Betterlife (6 devices), Fluke (3 devices), Amazon (1 devices). All 10 products are direct verifications in our compliance database.
Regulatory category
Literal j.1 of Resolution 1985
Zigbee devices operate on the 2.4 GHz ISM band using the IEEE 802.15.4 standard and fall under literal j.1 of Resolution 1985 — the same literal as WiFi and Bluetooth. The O-QPSK modulation with DSSS (Direct Sequence Spread Spectrum) of 802.15.4 explicitly meets the spread-spectrum requirement of literal j.1. For SUBTEL, what matters is the radio, not the application protocol.
Zigbee 3.0: the dominant smart home standard
Zigbee 3.0 (2016) unified all previous profiles (Home Automation, Light Link, etc.) into a single stack on top of IEEE 802.15.4. It operates exclusively on 2.4 GHz with mesh topology: mains-powered devices (routers) relay messages, and battery-powered devices (sensors, door contacts) can sleep for hours to save energy. The most relevant brands in Chile include Philips Hue (bulbs and sensors), IKEA DIRIGERA/TRÅDFRI (full ecosystem), Aqara (sensors and hubs), Sonoff (switches and sensors), and Tuya white-label devices sold under dozens of brands on MercadoLibre. All these devices require a SUBTEL QR code under Track 2 of Resolution 737.
Zigbee and the smart home ecosystem in Chile
Zigbee shares the IEEE 802.15.4 physical layer with Thread, but they are distinct and NOT interoperable network protocols. A Zigbee sensor cannot join a Thread mesh and vice versa, even if they use the same radio chip. Matter, on the other hand, is an application-layer protocol that can work over Thread or WiFi — not directly over Zigbee. Existing Zigbee devices can integrate into Matter ecosystems through bridges (like the Philips Hue Bridge). For more on these related protocols, see our dedicated Thread and Matter pages.
Frequency bands authorized in Chile
| Band | Range | Maximum power | Typical use |
|---|---|---|---|
| 2.4 GHz ISM (IEEE 802.15.4) | 2.4 – 2.484 GHz | 1 W (30 dBm) | Smart home hubs (Philips Hue Bridge, IKEA DIRIGERA, SmartThings), motion/door/temperature sensors, smart bulbs, smart plugs, digital locks, thermostats, Zigbee/Thread/Matter switches |
- 2.4 GHz ISM (IEEE 802.15.4): IEEE 802.15.4 uses 16 channels on 2.4 GHz (channels 11-26, each 5 MHz wide). O-QPSK modulation with DSSS at 250 kbps. Typical commercial device power: 0 to +8 dBm (1-6 mW) — well below the legal limit of 1 W. Modern multiprotocol chips (TI CC2652, Silicon Labs EFR32MG24, Espressif ESP32-H2) support Zigbee, Thread, and BLE on the same chip.
Source: SUBTEL Resolution 1985 EXENTA — official text on BCN. View Resolution 1985 on BCN
Regime under Resolution 737
Track 2 — Compliance QR + self-declaration
Since February 22, 2026, Zigbee devices no longer require prior formal certification before SUBTEL. They do require a public compliance page accessible via a QR code on the packaging, declaring bands, power, RF modules, importer with legal address in Chile, and a reference to the test report.
Brands with Zigbee devices
Most frequent equipment types
Wireless Laser Optical System (Alineador láser de ejes) (2)
Sensor Zigbee de fuga de agua (1)
Sensor Zigbee de movimiento PIR (1)
Sensor Zigbee de temperatura y humedad (1)
Sensor Zigbee de humo (1)
Sensor Zigbee de apertura puertas y ventanas (1)
Analizador de baterías (1)
Edge cases and common compliance mistakes
- Modern smart home hubs are multi-radio: a single device may include WiFi (802.11), Zigbee/Thread (802.15.4), and Bluetooth (BLE). EACH radio is an RF module that must be declared separately on the compliance page. Omitting the 802.15.4 radio because 'it's just the Zigbee coordinator' leaves the declaration incomplete.
- Do not confuse Zigbee/Matter CSA (Connectivity Standards Alliance) certification with SUBTEL compliance. CSA certification verifies cross-ecosystem interoperability — it's voluntary and commercial. SUBTEL compliance under Resolution 737 is mandatory and regulatory: it covers RF emissions, power, and bands. They are completely independent processes.
- Zigbee end devices (battery sensors, door contacts) DO need a SUBTEL QR, even though they don't connect directly to the internet. They emit RF on 2.4 GHz and are short-range devices under Resolution 1985. The fact that they require a hub to function does not exempt them from compliance.
- Firmware updates can add protocols: hubs like IKEA DIRIGERA and Philips Hue Bridge have received Matter support via OTA. If a device now supports Thread in addition to Zigbee, the compliance page should reflect all active hardware radios — firmware doesn't change the physical RF module, but it can activate capabilities that were dormant.
Devices in our database with this technology
Devices with Zigbee: Betterlife Sensor Zigbee de fuga de agua SmartHome, Betterlife Sensor Zigbee de movimiento PIR SmartHome, Betterlife Gateway Zigbee SmartHome, Betterlife Sensor Zigbee de Temperatura y Humedad SmartHome, Betterlife Sensor Zigbee de humo SmartHome, Amazon Echo Show 8 (3ra Gen), Betterlife Sensor Zigbee Puertas y Ventanas SmartHome, Fluke 500 Series Battery Analyzer (BT521), Fluke ROTALIGN ELITE LOCKED REST OF WORLD STARTER KIT, Fluke ROTALIGN CORE LOCKED REST OF WORLD STARTER KIT.
Devices with Zigbee
Catalog devices with compliance information
Search products by commercial name, brand, model or equipment type.
Grupo de Productos Bestmart
FlukeRows per page
Page 1 of 1
Related blog reading
Related technologies
Frequently asked questions about Zigbee
- Do Zigbee devices need SUBTEL certification in Chile?
- They do not require formal certification. Under Resolution 737, Zigbee devices comply through a compliance page and QR code on the packaging (Track 2, literal j.1 of Resolution 1985). This applies to hubs, sensors, smart bulbs, switches, and any device transmitting on 2.4 GHz using IEEE 802.15.4.
- Does Matter need a different SUBTEL QR than WiFi?
- No. The SUBTEL QR follows the same format for any short-range device under Resolution 737. What changes is the technical information on the compliance page: a Matter-over-Thread device documents IEEE 802.15.4 at 2.4 GHz, a Matter-over-WiFi one documents IEEE 802.11. The Matter protocol itself is software — SUBTEL regulates the radio, not the application.
- Can I sell a Zigbee hub in Chile without a QR?
- No. Since February 2026, every short-range device sold in Chile must display a QR linking to its compliance page. A Zigbee hub like the IKEA DIRIGERA or Philips Hue Bridge transmits on 2.4 GHz and is not exempt. Moreover, if the hub also has WiFi and Bluetooth (as most do), each radio must be documented on the same compliance page.
- Is Thread the same as Zigbee for SUBTEL purposes?
- Yes, regulatorily they are equivalent. Both use the same IEEE 802.15.4 physical layer on 2.4 GHz with O-QPSK modulation and fall under the same literal j.1 of Resolution 1985 with a 1 W limit. The difference (native IPv6 in Thread vs proprietary protocol in Zigbee) is in upper layers and does not affect the regulatory obligation before SUBTEL.
- Do IKEA smart home devices need certification in Chile?
- Yes. IKEA DIRIGERA, TRÅDFRI, and similar devices use Zigbee on 2.4 GHz and need a SUBTEL QR for legal sale in Chile under Track 2 of Resolution 737. This includes the DIRIGERA hub, smart bulbs, plugs, sensors, and blinds. If IKEA Chile is the direct importer, compliance responsibility falls on them.
- Does a hub with WiFi + Zigbee + Bluetooth need to declare all three modules?
- Yes. The compliance page must declare ALL RF modules in the device. A hub like the SmartThings Station with WiFi, Zigbee, and Bluetooth has three separate radios that must be documented with their respective bands and power levels per the manufacturer's test report. Omitting any one of them is an incomplete declaration before SUBTEL.
Need to certify equipment in Chile?